Plaque d'appui réglable

Description

The Adjustable Kick Plate protects openings on platforms when there is a risk of dropped objects and tools from height. The Kick plate or toe board is a low protective barrier and is easy to install with J-bolts, nuts and spring pins. The adjustable kick plate is designed to be a low protective barrier and is easy to install with galvanized J-bolts to grated floors. The toe board can protect any edge openings and is designed in standard sizes. The advantage for using the adjustable kick plate is cost savings because grated openings can be finished and safely closed off with a toe board directly. The adjustable kick plate is cost effective and can be reused at different locations.

Caractéristiques

  • Strong solid design, opening reinforced
  • Saves time and money
  • Fast to install and safe in use
  • No maintenance or hot work permit
  • Durable and reusable product

Matériau

  • Aluminium production is greener than plastic alternatives, recyclable and corrosion resistant.
  • Excellent outdoor weatherability
  • Non-corrosive – Silver colored
  • Design in accordance NEN-EN-ISO 14122
  • Adjustable kick plate is an OSHA guided designed standard toe board

Installation

The installation kit includes: galvanized J-Bolt, spring pin and nuts. The adjustable kick plate can protect any size opening, the more units to larger the opening. The adjustable kick plate comes in one standard size, the units can be increased at any time to adjust the size. The adjustable kick plates will reduce turnaround time for engineering and design, as well as installation time constructing the grated floors and railings. Easily installed and removed by hand.
Installed with clamps on grated steel floors

  • Supplied with galvanized J-Bolt, spring pin and nuts.
  • No need for welding or hotwork
  • No hot work permit, or scaffolding required
  • Fast installation by hand, easy removal

OSHA

This is what Occupational Safety and Health Administation (OSHA) provides as guidance on Guarding of Edges: 1917.112(d): Toeboards; Toeboards shall be provided when employees below could be exposed to falling objects such as tools. Toeboards shall be at least 3½ inches (8.9 cm) in height from top edge to floor level, and be capable of withstanding a force of 50 pounds (222 N) applied in any direction. Drainage clearance under toeboards is permitted.

Adjustable kick plate is an OSHA guided designed standard toe board:

  • No openings over one inch (25 mm)
  • Almost 4 Inches high, should at least 3½ inches (or 90 mm) high
  • Adjustable kick plate is capable of withstanding, a force of at least 50 pounds (222 n) applied in any direction

The CableSafe® Adjustable Kick Plate is a low protective barrier. The Toeboard or Kickplate protects openings on platforms when there is a risk of dropped objects and tools from height.

Obtenir une liste de prix Fiche technique

    • Produits conformes à l'OSHA
    • Spécialistes de la protection contre les chutes
    • Solutions pratiques

Références

Cablesafe® est développé pour les industries lourdes avec la sécurité comme priorité absolue. Les innovations de Cablesafe Safety ont prouvé leur utilité dans des industries telles que les raffineries, les usines chimiques, la construction navale, les installations électriques et nucléaires. Les employés et les entrepreneurs sont des utilisateurs convaincus des produits Cablesafe Safety. Certaines multinationales prescrivent l'utilisation de Cablesafe dans les procédures de leur propre entreprise afin d'adhérer aux pratiques de sécurité les plus élevées.

Simplicité en matière de sécurité

Crochets de sécurité, sécurité des câbles, sécurité des espaces confinés et prévention des chutes d'objets.

Nous utilisons des cookies pour nous assurer que nous vous offrons la meilleure expérience sur notre site web. Si vous continuez à utiliser ce site, nous supposerons que vous en êtes satisfait.