Ladder Safety System

Prevent accidents with ladder openings with the ladder safety system

Ladder Safety System offers perpetual security for any openings, stepping stool or stair passages, rooftop hatches and other confined zones, where consistent access for support and assessment is required. Ladder Safety System, are particularly intended to give a “retro-fit” answer for existing settled structures where opening security is required. The U-bolt association enables the gate to be associated with posts from 33.7 – 48.3mm (1″ – 1.5″ US).


Ladder Safety System has been intended to be completely flexible and can oblige openings up to 1m (30″ – 39″). Interfacing the “Ladder Safety System” to the supporting structure/post/stringer is straightforward by means of utilizing the U-bolt which can give association around any level, square or tubular stringer from 33.7 – 48.3mm (1″ – 1.5″).


Ladder Safety System is accessible in a scope of fantastic completions. Stirred: parts are provided with an excited complete to BS EN ISO 1461 and ASTM A53: Hot Dip Galvanized Coatings Specification and Testing Methods, giving a normal covering of between 55-100 microns. Aluminum: items are provided to Grade 6082 T6, and T4, Anodized Stainless Steel: items are provided to Grade 316.

Subscribe to our newsletter

[activecampaign form=1 css=1]

Part Based Systems

All items comprise of great tubing that flawlessly compliments Self-Closing Ladder Safety System. Ladder safety systemmounts effortlessly to all variations of the Ladder Climbing Safety System and Safety Gates For Ladder and in addition Self Closing Ladder Safety System, for example, Ships Ladder and Ladder Safety System.

Adaptable System

The Ladder Safety System run has been uniquely composed with U-jolt clasps enabling the items to be mounted to the supporting structure/post/stringer. This licenses association around any level, square or tubular stringer from 33.7 – 48.3mm (1″ – 1.5″).

Twofold Width Option

Ladder Safety System gives a self-shutting alternative to traverse openings in the vicinity of 3 and 6 feet over. The entryway can be changed nearby to suit the correct opening and is provided with a basic screw acclimation to guarantee exact arrangement where the two doors meet. Consistent to all applicable security enactment, the door does not require any locking instruments to be given by the administrator. The Ladder Safety System Double Gate is provided with three U-Brackets per post to guarantee a protected connection giving improved administration life and dependability. Extra latch packs can be provided that enable the entryway to be anchored to square, level or point uprights.

Testing and Certification

Tried as per the accompanying (see Specification Section for full points of interest)

  • EN 13374 Class A
  • EN ISO 14122 Part 3 and Part 4
  • OSHA
  • ANSI
  • Code
  • Canadian Standards Association
  • Canada Occupational Health and Safety
  • LIFE CYCLE TESTING – BS 6375-2:2009 Clause 6.5 – Opening and shutting of Gate through 90 degrees
  • SALT SPRAY TESTING – ASTM B117 – 11 – 55 Neutral arrangement more than 200 hours to survey execution of covering to oppose erosion

TOfficial Documentation

  • All Systems agree to the accompanying:
  • Work at Height Regulations
  • HSG 33 “Wellbeing and Safety in Roof work”
  • HSE Construction Sheet No. 21 “Taking a shot at level rooftops security against falls”
  • European Union Directives together with prerequisites of CDM Regulations. USA and Canada


The smooth lines of the standard stirred complete can be additionally improved by the use of powder covering to EN 13438. USA-AAMA 2603-2605.